Power Generation & Electricity: Gas Turbines & Regional Substation Solutions
Norwick delivers turnkey power generation engineering, extra-high voltage (EHV) grid substations, transmission line EPC, and hybrid microgrid installations — keeping major industrial zones powered with 99.98% operational reliability.
Continuous High-Voltage Supply & Turnkey Substation EPC
Norwick Energy Resources Limited operates with a core mission: building resilient, uninterrupted electrical power infrastructure for national utilities, heavy industrial complexes, and remote energy facilities. From 500MW heavy-duty gas turbine combined-cycle power plants to sub-zero climate substations and desert solar-gas microgrids, our engineering team manages complete lifecycle EPC execution.
Working in continuous consultation with national utilities (SEC, ADNOC, DEWA) and industrial operators, we integrate advanced SCADA telemetry, digital protection relays, and automated transformer oil diagnostic systems to eliminate power outages and sustain regional economic growth.
High-Efficiency Gas Turbine & EHV Substation Infrastructure
Real-time grid frequency synchronization, 380kV GIS switchgear, sub-second protection tripping, and zero-blackout power delivery.
Core Power Generation & Electricity Services
Turnkey engineering, procurement, and construction (EPC) solutions for thermal power plants, substations, and transmission networks.
2,500MW CCGT
GAS TURBINES
Gas & Steam Turbine Power Plant EPC
Combined-cycle gas turbine (CCGT) power plant engineering, heat recovery steam generators (HRSG), and turbine hall erection.
380kV GIS GRID
SUBSTATIONS
Extra-High Voltage (EHV) Substations
115kV to 380kV Gas Insulated Switchgear (GIS) substation construction, busbar installation, and control building civil works.
OHTL & XLPE
TRANSMISSION
Overhead Transmission Lines (OHTL)
High-voltage steel tower erection, conductor stringing, optical ground wire (OPGW) deployment, and underground XLPE cabling.
SOLAR + BESS
MICROGRIDS
Hybrid Solar & Microgrid Systems
Off-grid hybrid solar-gas power plants, battery energy storage systems (BESS), and islanded microgrid controllers.
DGA OIL TEST
DIAGNOSTICS
Transformer Testing & Oil Diagnostics
High-capacity power transformer oil filtration, dissolved gas analysis (DGA), turns-ratio testing, and insulation drying.
50MW FLEET
MOBILE POWER
Emergency Mobile Generator Fleets
Trailer-mounted 2MW to 50MW diesel and natural gas power packages for rapid grid stabilization and industrial black-start support.
HGPI & ROTOR
OVERHAULS
Power Plant Overhaul & Life Extension
Major gas turbine hot gas path inspections (HGPI), generator rotor rewinding, boiler tube repairs, and life assessment audits.
IEC 61850
SMART GRID
SCADA & Protection Relay Automation
Digital substation automation systems (SAS), numerical protection relays, RTU engineering, and remote SCADA integration.
Power Equipment & Materials We Source
Beyond EPC contracting, Norwick's procurement network sources utility-certified heavy electrical machinery and switchgear with 100% factory acceptance test (FAT) documentation.
Global Electrical Equipment Procurement
Pre-registered vendor material sourcing across SEC, DEWA, ADNOC, and international utility operators with 100% FAT test compliance.
Gas & Diesel Engine Generator Packages
- 1MW to 20MW Heavy Fuel Oil & Dual-Fuel Gensets
- Containerized Low-Emission Soundproof Power Packs
- Automatic Parallel & Grid Synchronizing Switchgear
EHV Switchgear & Gas Insulated Switchgear (GIS)
- 115kV, 230kV & 380kV SF6 GIS Bay Assemblies
- SF6 Gas Handling, Vacuum Circuit Breakers & Disconnectors
- Indoor Air-Insulated Medium Voltage Switchgear (11kV/33kV)
Power Step-Up & Distribution Transformers
- 50MVA to 500MVA Oil-Immersed Step-Up Transformers
- On-Load Tap Changers (OLTC) & Bushings
- Dry-Type Cast Resin Distribution Transformers
High-Voltage Conductor & XLPE Cables
- 132kV to 380kV Underground XLPE Copper Cables
- ACSR & AAAC Overhead Conductor Spools
- High-Voltage Jointing Kits & Cable Termination Heads
Digital Protection Relays & SCADA Panels
- Numerical Differential & Distance Protection Relays
- Remote Terminal Units (RTU) & Ethernet Switches
- Substation Battery Banks & Industrial Uninterruptible Power (UPS)
Engineered for Maximum Grid Stability & Reliability
Unrivaled technical standards, pre-qualified vendor standing, and rapid deployment for utility power grids.
99.98% Grid Availability SLA
Our power plants and substations are engineered with N+1 redundancy, sub-second protection tripping, and dual utility feeds to guarantee continuous uptime.
SEC & Utility Pre-Qualified
Formally pre-qualified with Saudi Electricity Company (SEC), ADNOC, and DEWA under registered vendor number #10048291.
Fast-Track Turnkey EPC Execution
Streamlined project management protocols enable rapid mobilization for emergency power installations and substation commissioning.
Extreme Climate Engineering
Substation enclosures and turbine intake filtration designed to operate seamlessly under extreme sub-zero cold or +55°C desert ambient heat.
Connected Power Delivery Pipeline
A rigorous four-stage engineering roadmap ensuring compliance from initial load modeling to live grid energization.
1. Load Modeling & FEED
Short-circuit calculations, transient stability analysis, load flow modeling, and FEED substation design.
2. Civil & Electrical EPC
Site preparation, transformer pad civil works, GIS building construction, and heavy cable trenching.
3. FAT, SAT & HV Testing
High-potential (HipOT) testing, primary current injection, protection relay calibration, and FAT witness.
4. Grid Energization
Live utility grid synchronization, 72-hour trial operation, SCADA link integration, and hand-over.
Regional Power Infrastructure Operations
Deploying utility-grade power generation fleets and extra-high voltage grid interconnections across key strategic hubs.
Eastern Province Industrial Grid Command
Supplying heavy industrial power to petrochemical refineries and manufacturing hubs across Jubail and Dammam with dual 230kV redundant GIS substations.
Riyadh Metropolitan Extra-High Voltage Grid
EPC deployment of 380kV EHV substations and underground XLPE power cables to support rapid urban expansion and data center infrastructure.
Red Sea & Northern Frontier Hybrid Microgrids
Building zero-emission hybrid power systems incorporating solar PV arrays, BESS battery storage, and quick-start gas turbine back-up generators.
GCC Interconnection & Regional Power Trade
Partnering with international utility authorities on cross-border high-voltage direct current (HVDC) links and regional energy trade corridors.
Partner with Norwick for Your Next Power & Grid Project
Submit your technical specifications, FEED documentation, or RFP tender requirements. Our electrical engineering team will provide a comprehensive proposal within 48 hours.
Request Power Division RFP
Direct technical inquiry channel to principal power grid directors.
Clear Engineering Answers for Executive Decisions
Explore key operational parameters regarding our turn-key EPC execution, offshore compliance standards, equipment mobilization timelines, and environmental commitments.
Need Custom Technical Specs?
Our principal engineering directors provide tailored technical responses within 24 hours.
Speak with Senior EngineerDepending on water depth and SURF technical parameters, rapid mobilization is executed within 14 to 28 business days from our Aberdeen, UK and Middle East logistics hubs. All operations strictly adhere to DNV-GL and ABS offshore maritime classification standards.
We integrate proprietary Vapor Recovery Units (VRU) and closed-loop telemetry systems engineered to capture 99.8% of fugitive hydrocarbons. This aligns directly with World Bank zero-routine-flaring guidelines and ISO 14001 environmental frameworks.
All division operations operate under fully accredited ISO 9001:2015 Quality Management, ISO 14001 Environmental Management, and ISO 45001 Occupational Health & Safety protocols certified independently by Lloyd’s Register.
Yes. Our in-house engineering group formulates bespoke Front-End Engineering Design (FEED) study packages specifically modeled for High-Pressure High-Temperature (HPHT) reservoir fields and ultra-deepwater subsea tie-backs.
We maintain direct tier-1 global agreements with leading OEM manufacturers for OCTG tubulars, subsea Christmas trees, and manifold valves. Our logistics hub provides 24/7 dedicated emergency air-freight transport to ensure zero downtime.
Explore Our Other 13 Specialized Divisions
Ready to Elevate Your Energy & Industrial Operations?
Speak directly with our senior engineering directors to request a tailored technical proposal, evaluate equipment specs, or schedule an on-site feasibility study across any of our specialized operating divisions.